For more moderate industry applications, National Vacuum Equipment’s new entry level vacuum blower – the B500 tri-lobe blower is the ideal choice. It’s designed to be used with a 3” plumbed system with a maximum recommended operation of 2400 RPM and comes with better noise limiting features. We constantly upgrade and improve our product specifications to match your operational needs and this new NVE model is another gamechanger in the market.
Eng
- Eng
- Deu
- Fra
Feature and Benefits
- Proven air injection cooling
- Oil-less operation
- Built in vacuum/pressure change over valve
- Easily maintainable pre filter
- Easily accessible grease points
- Continuous duty to 24” HG
- Highly efficient three lobe rotor design
- Blower flush kit included
- Designed, built, and supported in the USA
- Attached ballast silencing system
- An enhanced exhaust check which provides minimal
* The B500 is an entry vacuum blower designed to be used with a 3” plumbed system with a maximum recommended operation of 2400 RPM. At 2400 RPM it is capable of 431 CFM free air, 80% efficient, and able to generate 24” HG corrected to sea level. It is able to run at maximum vacuum with no vacuum relief valve required. The B500 silencing system is able to limit exhaust noise and should require no additional silencing to yield acceptable acoustic performance. Because the B500 is an entry level machine designed to be used with 3” plumbing, it is not recommended for the machine be operated at a higher RPM.
| SPECIFICATIONS | B500 VACUUM BLOWER |
| *Operating Range - RPM | 2400 |
| Maximum Airflow | 431 |
| Maximum Horse Power | 30 |
| *Maximum Vacuum | 24” HG |
| Maximum Pressure | 15 PSI |
| Porting Size | 3” |
| Shaft Size | 1 3/8” |
| Pump Dimensions | L 24” W 19 15/16” H 24 3/16” |
| Approximate weight | 370 lbs |
B500 SILENCER PAK
- B500 high vacuum tri-lobe blower with 4-way vacuum pressure change over valve
- Oil-less operation
- Exhaust air silencer
- Can be mounted in any position
- Ballast air silencer
- 1:2 speed increasing right angle gearbox
- Clockable gearbox bracket for easy matching of drive line angles
- E20 coupler set
- All elbows, fittings, and high temp hose are factory connected
- Designed, built, and supported in the USA
- L 39 5/16” W 32 3/4” H 26 11/16”
B500 MAX PAK
- B500 high vacuum tri-lobe blower with 4-way vacuum pressure change over valve
- Oil-less operation
- Aluminum Moisture Trap
- Exhaust air silencer
- Ballast air silencer
- 1:2 speed increasing right angle gearbox
- Clockable gearbox bracket for easy matching of drive line angles
- Pressure relief valves and vacuum pressure gaug
- Designed, built, and supported in the USA
L 64 13/16” W 32 1/2” H 58 1/8”